Explosion proof lighting for flammable gas environment
IP Code: IP66
Ex Code: Ex d IIB T6 Gb
Ex tb IIIC T80℃ Db
Ambient temp.: -40℃ to +45℃
Standard: GB3836.1, GB3836.2
ATEX: INERIS 13ATEX0062X
IECEX: IECEx INE 15.0019X
Model: BC9101 Series
Applicable to IIA, IIB, IIC containing explosive gas or steam environment, the temperature group is T1-T6, the minimum ignition temperature of the dust layer with a certain thickness in the indoor and outdoor dangerous places or flammable dust environment is higher than the specified Floodlighting of the required 21st and 22nd districts.
1. The explosion-proof type of the lamp is gas explosion-proof composite type or dust explosion-proof type, which is suitable for lighting in gas or dust explosion hazardous places.
2. The luminaire is mainly composed of an explosion-proof light source cavity, a composite electric cavity, and a mounting bracket.
3. The LED radiator of the lamp is special aluminum alloy, the electrical cavity shell is made of aluminum alloy casting, and the outer surface of the lamp is sprayed with polyester powder.
4. The luminaire uses tempered glass transparent cover, which has high light transmittance and good impact resistance.
5. The lamp has the advantages of good corrosion resistance, high luminous efficiency, wide illumination range, and durability.
6. The joint surface of the luminaire is equipped with rubber sealing ring to improve the protection performance of the luminaire. It is suitable for use in wet or outdoor explosion hazardous places.
7. This explosion proof LED adopts CREE LED as light source, no dark spot, can save 60% or more on energy than Metal Halide Lamp. The light source has the advantages of energy saving, long service life, high luminous efficiency and good shock resistance, and is maintenance-free for a long time.
8. The luminaire is bracket-mounted and can be used for seat mounting, suction wall mounting or pole mounting (see installation diagram). The luminaire is suitable for rubber sheathed flexible cable entry or interference tube entry.
50 Hz/ 60 Hz
Leading-in cable diameter
326* 370* 88mm
High Pressure Mercury Lamp
100~ 277 VAC
24 VAC/ DC; 36VAC/ DC
Q1: What is the warranty for our lamps?
A1: For the lamps, we have 3~5 years warranty.
Q2: How do you ensure the quality
A2: We get three QC processes:
2.1. For raw materials;
2.2. During the half of production;
2.3. Final QC test one by one after aging 24 hours.
Q3: How to do if any quality problems on our side in the warranty time?
A3: First, take pictures or videos as proof and send to us.
We will replace new ones after checking the default reason.
Q4: Can we get support if we have our own market position?
A4: Please inform us your detaiLED market demand, we will discuss and propose helpful suggestion for you, to find the best solution for you.
Q5: Is there any cheap shipping cost to import to our country?
A5: For small order, express will be the best.
And for bulk order, sea ship way is best but take much time.
For urgent orders, we suggestion to airport
Q6: How many days will samples be finished? And how about the mass production?
A6: General 5-7 days for samples making. The leading time of mass production will depend on the quantity.